11
ff)
Strength of the breaking intensity may be reduced after long exploitation of the wheelchair.
You are allowed to adjust breaks yourself. In order to do that you must loosen the screws
locking the position of the break, move the mechanism of the break towards the wheel so that
the wheel will not rotate when break will be on again (try the adjustment with the user sitting
on the wheelchair). After final adjustment secure back the mechanism with the screws.
gg)
It is extremely important to keep all wheelchairs components clean in order to maintain the
product parameters.
hh)
Storing the wheelchair in areas with very high humidity (baths, laundry, etc.) or in the open
air, also the lack of hygiene causes rapid loss of operating parameters and aesthetic of the
product.
ii)
It is unacceptable to use the wheelchair after discovering any visible or detectable damages or
when the wear of some parts may cause an accident. All the repairs need to be performed by a
skilled personnel and during the warranty period only by the manufacturer's service.
jj)
In case of wheelchair fitted with pumped wheels You should not exceed the maximum
permissible inflation pressure of the wheels, the value is indicated on the tire wheels.
kk)
During transport (e.g. In the trunk), do not burden stroller, it may weaken or damage its
structure.
ll)
Keep out of the reach of children under five years of age.
mm)
Keep extreme caution while unfolding / folding the wheelchair, lack of attention may
result in finger trap by elements of the area of:
-
joining and removing the footrest,
-
brakes,
-
while folding the wheelchair around moving parts.
7.
Everyday use and maintenance
TABLE
Illustration 26.
•
Before mounting the table, should screw the table legs.
•
Then unscrew the screws, put in it two washers (one smaller second bigger). It is important
that the pads are properly pressed into the fastening element.
