19
TECHNICAL REVIEW
The review should be carried out regularly, it should be preceded by thorough cleaning the wheelchair
(so as to reveal any hidden damage).
Frequency
Object of control
Comments
Before first
installation
Checking the technical condition and
all the elements within the
packaging.
Check if any elements have any
visible mechanical damage.
Before each use
Control of wheels, brakes,
The brakes can worn out, check the
condition of the brakes before each
use. You should also check the
condition of wheels and clean them
from dust and sand.
Every two weeks
Screw and nut control regarding their
correct fixing.
Make sure if all the screws and top
are fixed tightly.
Every two months
Cleanliness and general condition.
In case of mechanical damage
contact the producer immediately.
Once a month
wheel axles
Wheel axles must be conserved,
seting between the axle and the hub a
few drops of lubricant preservative.
In addition, make test each wheel.
Raise the wheelchair so that the
tested wheel was located above the
ground, the wheel should rotate
freely but without backlash on axle.
Once a month
State connections, threaded, soldered,
the system of quick release rear
wheels
pay attention to the cracks on frame
material in connections threaded,
soldered, the system of quick release
rear wheels.
Once a month
Condition of the tires
Make sure that the tire tread is not
worn and that the tires have no
visible signs of damage.
Repair
•
In case of reparation, please contact the producer..
Customer service
•
If you have any questions or need help, contact the producer
