ÐÓÑÑÊÈÉ
9
ANTI-DRIP
1.
The anti-drip system, which is designed to automatically prevent water from
escaping through the soleplate when the iron is too cold.
2.
During use, the anti drip system may emit a loud clicking sound, particularly
during heat-up or whilst cooling down. This is perfectly normal and indicates
that the system is functioning correctly.
STORAGE
•
Turn the temperature control dial (1) to "MIN" and set the steam dial to the "0"
position (= no steam).
•
Turn off the iron and disconnect the plug from the wall socket.
•
Pour any remaining water out of the water tank (fig.8)
•
Stand the iron upright and let it cool down sufficiently (fig.9)
•
The power cord can be wound around the cord storage.
•
Always store the iron in an upright position.
CARE AND CLEANING
•
Before cleaning the iron ensure it is disconnected from the power supply and has
completely cooled down.
•
Deposits on the Soleplate may be removed with a rough cloth soaked in a vine-
gar/water solution.
•
The casting may be wiped with a damp cloth and then polished with a dry one.
•
Do not use abrasives on the Soleplate.
•
Keep the Soleplate smooth: avoid hard contact with metal objects.
PROTECTIVE SAFETY CUT-OUT
In the unlikely event of the thermostat failing, the protective cut-out will operate to
prevent the iron from overheating.
The iron should then be taken to an authorized repair shop.
SPECIFICATION
Power requirement
230 V ~ 50 Hz
Max. power
1800 W
The manufacturer reserves the right to change the characteristics of
the device without prior warning.
SERVICE LIFE OF THE IRON IS NOT LESS THAN 3 YEARS
ENGLISH
8
ÑÕÅÌÀ È ÎÏÈÑÀÍÈÅ ÓÒÞÃÀ
1. Òåðìîðåãóëÿòîð
2. Ðàñïûëèòåëü
3. Ðåãóëÿòîð ïàðà
4. Êíîïêà óâëàæíåíèÿ
5. Êíîïêà îòïàðèâàíèÿ
6. Èíäèêàòîð
7. Ðåçåðâóàð
8. Ïîäîøâà
9. Øíóð
10. Ìàðêèðîâêà
11. Êíîïêà ñàìîî÷èñòêè
Ðèñóíîê 1
1211.qxd 29.07.2004 15:56 Page 14
