6
ENGLISH
tion “ ”, release the lock button (16) and
make sure that the geared lid (10) is fixed
properly.
•
Place the motor unit (4) on the geared lid
(10) and rotate it clockwise until it is securely
fixed.
•
Insert the power plug into the mains socket.
•
Set the required speed using the control knob
(1) from 1 to 20.
•
To switch the blender on press and hold the
button (2).
•
When the button (3) is pressed, the knife
rotates at maximum rotation speed.
•
Place the products into the chute of the lid
(10); use the pusher (9) for food feeding.
Press the pusher gently while feeding.
•
After using the unit remove the power plug
from the mains socket, disconnect the motor
unit (4) from the geared lid (10) turning it
counterclockwise.
•
Then remove the geared lid (10) from the
bowl (17), pressing the lock button (16) and
turning the lid clockwise.
•
Carefully remove the attachment (13).
•
Take the chopped products out of the pro-
cessing bowl (17).
•
Clean, wash and dry all the used parts imme-
diately after operation.
CLEANING THE UNIT
•
After the end of operation or before cleaning
always switch off and unplug the unit.
•
Clean, wash and dry all the used parts imme-
diately after operation.
•
It is recommended to wash all removable
parts with warm water with a neutral deter-
gent.
•
For easy cleaning of cubic grid (15) take it
out of the attachment (13) and remove the
remaining products using the pusher (8).
•
After processing of salty or sour products
rinse the used attachments with water imme-
diately.
•
Clean the motor unit (4) with a damp cloth.
•
Do not use coarse sponges, abrasives and
solvents to clean the unit.
•
Do not immerse the motor unit (4) and the
processing bowl geared lid (10) into water or
any other liquids; do not wash them in a dish-
washing mashine.
•
While processing of products with strong dye-
ing properties (for instance carrot or beet-
root) the bowls or attachments can get col-
ored, wipe the attachments or bowls with a
cloth, dampened in vegetable oil.
STORAGE
•
Clean and dry the attachments thoroughly
before taking them away for storage.
•
Do not wind the power cord around the motor
unit.
•
Keep the blender set away from children in a
dry cool place.
DELIVERY SET
Motor unit – 1 pc.
Blender attachment – 1pc.
Whisk gear – 1pc.
Whisk – 1 pc.
Processing bowl geared lid – 1pc.
Processing bowl – 1pc.
Chopping knife – 1 pc.
Measuring cup – 1pc.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Power supply: 220-240 V ~ 50/60Hz
Power consumption: 800 W
The manufacturer preserves the right to
change the specifications of the unit without a
preliminary notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the
Council Directive 89/336/EEC and to
the Low Voltage Regulation (73/23 EEC)
VT-1467.indd 6
18.10.2012 15:06:31
Summary of Contents for VT-1467 GY
