4
ENGLISH
• Do not use the device, if its power cord,
the plug or other details are damaged.
• Do not repair the device independently.
Apply to the authorized service center if
the power cord is damaged or if you need
to repair the device.
• Store the device in a dry, cool place inac-
cessible for children.
• The device is intended only for household
usage, commercial usage of the juicer is
forbidden.
Preparation for work
• Take the device from packing.
• Before you connect the device to the
electricity network, make sure that the
operating voltage of the device corre-
sponds to the voltage of the electricity
network.
• Carefully wash out all removable details
which will contact products, and dry
them.
Note
: Be cautious holding the filter-grat-
er, the grater has a sharp surface.
• Wash up vegetables/fruit and cut in slices
which would easily pass into the lid throat
of a juicer.
• While extracting juice from stone fruits
(for instance cherry, peach etc.) remove
stones from the fruit.
Making juice
• Put the device on stable dry and flat sur-
face.
• Before assembling, make sure that the
device is switched off and unplugged.
• Establish the juice tank (5) on the motor
block (7).
• Establish the filter-grater (4) in the juice
tank (5).
Note
: do not use the filter-grater at de-
tection of mechanical damages.
• Establish a lid (3) on the juice tank and fix
by clamps (6).
• Establish the container for pressed skin
(8).
• Insert the plug into the socket.
• Switch on the juicer, having established
the switch (9) in position «1» (low speed)
or in position «2» (high speed).
Note
:
- «Low speed» - for extracting juice from
soft vegetables/fruit (tomatoes, pears,
strawberry, oranges, plums, grapes,
pumpkin, onions, cucumbers, etc.).
- «High speed» - for extracting juice from
firm vegetables/fruit (artichokes, carrots,
apples, pepper, beets, potatoes, pineap-
ples, vegetable marrows, celery, spinach,
fennel, leek, etc.).
Attention!
Handling the products creating
additional loading on the motor (viscous
and/or firm products) it is recommended
to use the device on the raised speed «2»
in order to avoid a stop of the motor in the
course of work and its subsequent exit out
of operation.
• The juicer will start working only if all re-
movable parts are established correctly
and the lid (3) is fixed by clamps (6).
• Load products only when the engine is
working.
• Gradually put preliminary cut pieces of the
products into the lid throat (2) and slightly
press them with the pusher (1). Do not
press strongly the pusher; it can lead to
worse quality of the juice or to stop of the
filter-grater rotation (4). Longer vegeta-
bles and fruit being processed, the more
juice you will get.
• It is forbidden to immerse fingers and
other subjects in the lid throat (2).
• Periodically check the condition of the fil-
ter-grater (4) concerning blockage of the
filter, if necessary wash the filter-grater
(4).
• Check filling of the container for pressed
skin (8), if it is full, switch off the unit, take
the plug out of the socket, and remove
the pressed skins from the container.
4
1631.indd 4
1631.indd 4
22.12.2010 15:10:55
22.12.2010 15:10:55
