5
ENGLISH
preliminary heated up; it disinfects wa-
ter and provides its easy evaporation.
Note:
- switching on this function can to
some extent change the indications
of the room temperature (27) and
humidity (28) on the display (7).
8. You can set up operation time of the
unit using the (2) “Timer” button. Press
the button (2) to set the required opera-
tion time of the unit from 1 to 12 hours,
it will be reflected on the display (7) by
corresponding digit indication (24).
9. Use the (3) steam “Max/Min” button to
set the required intensity, it will be re-
flected on the display (7) by the chang-
ing indication (26).
Note:
- if the unit operates in the automatic
humidity maintenance mode, steam
intensity control will be performed
automatically.
10.To switch on the automatic humid-
ity maintenance mode, press the (4)
“Humidity” button, the “Setup” symbol
will be flashing on the display, press
the button (4) again to set the required
humidity in the room (from 45 to 90%,
setting step is 5%). In the automat-
ic humidity maintenance mode the
“Setup” symbol will be flashing on the
display (7), temperature (27), humid-
ity (28) and steam intensity (26) will be
displayed. To view the preset humidity
value, press the (4) “Humidity” button,
the preset humidity value will be flash-
ing on the display (7), in 5 seconds the
information on the display will return to
the previous mode.
To switch off the automatic humid-
ity maintenance mode, press the (4)
“Humidity” button several times, when
humidity value reaches 90%, the
“Setup” symbol will go out.
11.When you want to stop the work of the
unit, switch off the unit, by pressing the
(5) “Power” button, the indication (21)
will appear on the display (7), the room
temperature (27) and humidity (28) will
be displayed.
12.When the water tank becomes empty
(11), the humidifier will switch off au-
tomatically, the indication (23) will light
up on the display (7) and you will hear
sound signals.
Note:
Water tank backlight (18) will help you
estimate water quantity in the tank.
REMOTE CONTROL (19)
For convenient control of the unit, use the
remote control.
If there is an isolation insert in the battery
compartment, remove it, if the battery is
supplied separately, remove the holder of
the battery, by preliminary pressing the
clamp, insert the battery in the holder,
strictly following the polarity, insert the
battery holder into the remote control.
Correspondence of the remote control
buttons to the buttons on the control
panel of the unit:
29. “Power” on/off button (5).
30. “Ozone” mode on/off button (6).
31. “Heating” mode on/off button (1).
32. “Timer” setting button (2).
33. “Humidity” setting button (4).
34. Steam intensity setting button - “Max/
Min” (3).
CLEANING AND CARE
Warning: Always switch off and unplug
the unit before cleaning it.
1764.indd 5
1764.indd 5
04.06.2010 14:11:17
04.06.2010 14:11:17
