6
ENGLISH
– Use the temperature setting button (6) to set the neces-
sary operating surface (2) temperature within the range
from +140 °С to +200 °С.
Hair type
Temperature
For fine hair, sensitive to
high temperature
Temperature from
+140 °С to +160 °С
For normal wavy hair of
medium thickness
from +160 °С to +180 °С
Hard, thick, curly hair
from +180 °С to +200 °С
Note: while setting the temperature, remember that the
operating surface heats up fast but cools down much
longer.
– Once the operating surface (2) reaches the set tem-
perature, the flashing light indicators on the indication
panel (5) will glow constantly.
– Take a hair lock with the free hand.
– Press the clamp handle (4), place the end of the lock on
the operating surface (2) and move the clamp (4) down.
Holding onto the protecting tip (1) and handle (8), wind
the lock around the operating surface (2).
– Wait for a while, then press the clamp handle (4) and
release the hair lock.
– Repeat this procedure on the rest of your hair.
Notes:
– during the first operation some foreign smell and a small
amount of smoke from the heating element is possible,
it is normal.
– do not touch the operating surface (2) during the unit
operation, hold the unit by the protecting tip (1) with one
hand and by the handle with the other (8).
– during breaks in operation, place the unit on the safety
stand (3) on a flat heat-resistant surface.
– do not comb the hair right after curling it, let it cool
down, divide big locks into smaller ones carefully to
make the hairstyle look natural.
– After you finish using the unit, switch the unit off by
pressing and holding the button (7) «
», the indication
panel (5) will go out, then unplug the unit.
Note: - if the temperature setting button (6) has not
been pressed during 30 minutes, the curling tongs will be
switched off automatically.
