6
ENGLISH
Step 3 – cutting temples
Switch the unit off and install the «4-6 mm» attach-
ment. Cut the hair on the temples. Then con-
tinue cutting towards the top of the head with the
«10-12 mm» attachment.
Step 4 – cutting the top of the head
Using the «10-12 mm» attachment cut the hair from
the top of the head towards the crown against the
hair growth direction.
Step 5 – the final part
Remove the attachment from the unit, turn the
blades of the unit towards the hair and carefully trim
hair on the temples and neck. Do not press on the
unit; there is danger of injuries or cuts when open
blades come in contact with the skin.
Cone-shaped haircut
Set the necessary attachment and start cutting from
the head back towards the crown. Cut hair against
hair growth from the head front to the crown and
on the head sides. To get a flat top haircut, use the
comb (11): lift the locks and cut them along the
comb. Comb the hair to reveal uneven locks.
Hair thinning
The essence of hair thinning is in cutting off separate
locks at different height for achieving smooth transi-
tion between locks. Hair thinning is performed at the
final phase of hair cutting with the attachment (9).
CLEANING AND CARE
–
Switch the unit off after use.
–
Remove the used attachment from the unit body
and clean the inside and outside of the attach-
ments from the cut hair, using the cleaning brush
(12).
–
You can wash the attachments (7, 9) under a
water jet, then wipe them and dry.
–
Wipe the unit body with a soft slightly damp cloth.
Do not immerse the unit body, the power adapter
and the adapter cord into water and other liquids.
–
Never use solvents or abrasives to clean the unit
body and attachments.
Blades
Regularly lubricate the blades (1, 2) using the oil (13)
supplied with the unit.
–
Switch the hair clipper off with the «ON/OFF»
button (4), unplug it if the unit is being charged.
–
Remove the attachment (7 or 9)
–
Remove the block of the blades (1, 2) by pressing
on the front part of the block and removing it from
the groove on the unit body (pic. 2).
–
Use the brush (12) to clean the unit body and the
blade block from the cut-off hair.
–
Apply one or two drops of lubricating oil (13) on
the teeth of the blades and the supporting part of
the upper blade (pic. 3).
–
Insert the ledge on the lower part of the blade
block into the grooves on the unit body. Press
on the upper part on the block until it is fixed
(pic. 4). Clicking of the lock indicates proper
installation.
–
Turn the hair clipper on and make sure that the
blades are moving smoothly.
–
Switch the unit off, clean excess oil with a dry
cloth.
STORAGE
–
Clean the unit and lubricate the blades with lubri-
cating oil (13) before taking the unit away for
storage.
–
Keep the unit away from children in a dry cool
place.
DELIVERY SET
1.
Hair clipper – 1 pc.
2.
Attachment combs – 6 pcs.
3.
Thinning attachment – 1 pc.
4.
Power adapter – 1 pcs.
5.
Comb – 1 pc.
6.
Cleaning brush – 1 pc.
7.
Lubricating oil – 1pc.
8.
Instruction manual – 1 pc.
TECHNICAL SPECIFICATIONS
Input voltage of the power adapter: AC (alternating
current)100-240 V ~ 50/60 Hz
Output voltage: DC (direct current) 4 V, 1.5 A
Maximal power consumption: 9.5 W
The manufacturer preserves the right to change
the specifications of the unit without a preliminary
notification.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be ob-
tained from the dealer from whom the appliance
was purchased. The bill of sale or receipt must be
produced when making any claim under the terms
of this guarantee.
This product conforms to the EMC-
Requirements as laid down by the Council
Directive 2004/108/ЕС and to the Low
Voltage Regulation (2006/95/ЕС)
VT-2541.indd 6
11.03.2014 10:41:47
