TRANSMISSION COLLISION
Signals from other household devices, such as door bells, home security systems and entry
controls, may interfere with those of this product and cause temporarily reception failure. This
is normal and does not affect the general performance of the product. The transmission and
reception of temperature readings will resume once the interference recedes.
CALENDAR CLOCK DISPLAY MODES
The clock and the calendar share the same section of the display. The calendar is displayed in
a day#month format.
Each press on the MODE button will change the display between clock with second, clock with
day of week, zone time with day of week. zone time with second and day#month.
HOW TO SET THE CLOCK
To set the clock manually, hold MODE for two seconds it will show the year. Use [
$
] or [
#
] to
change it. Press MODE to confirm. Repeat the same procedure to set the month, date, date#
month format, 12/24, hour, minute, display language, zone time offset and °C/°F.
During the setting, press and hold [
$
] or [
#
] will increase or decrease the value rapidly.
For display language, you can choose among English (EN), German (DE), French (FR), Italian
(IT) and Spanish (SP) # in that order. If there is an item you do not wish to change, simply press
[ MODE ] to bypass the item. When you finished the change, press [ MODE ] to exit. The display
will return to the clock mode.
HOW TO SET AND ARM THE ALARM
To set an alarm,
1. Press [
ALARM
] once to display alarm time. If the alarm is disarmed, the time will be dis#
played as “
OFF
”.
2. Hold [
ALARM
] for two seconds. The hour digits will blink.
3. Enter the hour using [
$
] or [
#
].
4. Press [
ALARM
]. The minute digits will blink.
5. Enter the minutes using [
$
] or [
#
].
6. Press [
ALARM
] to exit.
7. Repeat the same procedure to set single alarm.
The alarm “
” “
” and “
PreAL
” icons will be displayed indicating which alarm is
armed. You can also arm or disarm an alarm by pressing the [
$
],[
#
] button at alarm display
mode.
Press ALARM to return to clock display mode.
SNOOZE FEATURE
When the alarm sound is on, press the snooze key enter snooze mode. After 8 minutes, alarm
sound will be wake up automatically. The snooze cycle will be restarted if you press the snooze
key again.
If you leave the alarm sound on for 2 minutes, it will enter snooze mode automatically with max#
imum 3 times.
ENGLISH
8
3542.qxd 15.07.05 10:37 Page 8
