ENGLISH
10
HOW TO SET THE RADIO CONTROLLED CLOCK
1. After the batteries are installed. The clock will automatically search the radio signal.
It takes about 3-5 minutes to finish this process.
2. If user wishs to disable the auto-reception feature, holds the “Up” front panel for 2
seconds to disable it.
3. To enable the auto-reception feature again, holds the “Up” for 2 seconds again to
force it receive and allow it receive at desired time.
4. If the radio signal is received, the date & time will be set automatically with radio
control signal icon [ ] turns on.
5. If the clock fails to receive the time signal, it will be show as [ ] icon. Then user can
set the time manually.
CALENDAR CLOCK DISPLAY MODES
The clock and the calendar share the same section of the display. The calendar is dis-
played in a day-month format.
Each press on the
MODE
button will change the display between clock with second,
clock with day of week, zone time with day of week, zone time with second and day-
month.
HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold
MODE
for two seconds it will show the year. Use [-] or
[+] to change it.
Press
MODE
to confirm. Repeat the same procedure to set display language, °C/°F,
year, month, date, date-month format, 12/24, hour and minute.
During the setting, press and hold [-] or [+] will increase or decrease the value rapidly.
For display language, you can choose among English (En), German (DE), French (Fr),
Italian (IT) and Spanish (SP) - in that order.
If there is an item you do not wish to change, simply press
[MODE]
to bypass the
item.
When you finished the change, press
[MODE]
to exit.
The display will return to the clock mode.
HOW TO SET AND ARM THE ALARM
To set an alarm:
1. Press [
ALARM
] once to display alarm time. If the alarm is disarmed, the time will be
displayed as “OFF”.
2. Hold [
ALARM
] for two seconds. The hour digits will blink.
3. Enter the hour using [-] or [+].
4. Press [
ALARM
]. The minute digits will blink.
5. Enter the minutes using [-] or [+].
6. Press [
ALARM
] to exit.
7. Repeat the same procedure to set single alarm.
3549.indd 10
49.indd 10
02.06.2006 16:59:37
02.06.2006 16:59:37
