7
ENGLISH
3. Cancelling the selected function/
cooking program
To cancel the selected function, press and the «KEEP
WARM/STOP» button (11), and to cancel the selected
program, press and hold the button (11) for more than
2 seconds, the symbols «----» will appear on the dis-
play (20), the bowl bottom temperature will appear on
the display (19) and the indicator
on the control
panel (2) will be flashing.
The unit will switch back to the standby mode.
4. End of cooking program
After cooking is finished you will hear 5 short sound
signals, the symbols «----» will appear on the display
(20), the bowl bottom temperature will appear on the
display (19) and the indicator
on the control panel
(2) will be flashing.
Depending on the selected cooking program, the unit
will either switch to the keep warm mode automatically
or will switch back to the standby mode and be ready
for selecting a new cooking program.
To stop the selected cooking program press and hold
the «KEEP WARM/STOP» button (11) for more than
2 seconds, the symbols «----» will appear on the dis-
play (20), the bowl bottom temperature will appear on
the display (19), and the indicator
on the control
panel (2) will be flashing.
After that the unit will be switched to the standby mode.
5. Keep warm mode
Upon finishing of certain cooking programs the unit
will be switched to the keep warm mode automati-
cally. See the table to find the cooking programs
in which the keep warm mode switches on auto-
matically. In this case the keep warm mode indica-
tor will light up on the control panel (2) after such
programs are selected and started
. After such
cooking program is finished, you will hear 5 short
sound signals and the multicooker will be switched
to the keep warm mode automatically. The keep
warm mode indicator
will light constantly, the
symbols «00:00» will appear on the display (20)
and the count of the keep warm time will start. The
bowl temperature will be maintained for 24 hours
and the display (19) will show the bowl bottom
temperature.
Note:
•
In the keep warm mode the bowl bottom tempera-
ture is maintained at 70-75°C.
•
Despite the unit keeps the ready dish warm for 24
hours, it is not recommended to leave the food
in this mode for too long, because this may spoil
the food.
•
During cooking you can switch the keep warm
mode off. To do this, press the «START» button (15)
. The keep warm mode indicator
will go out.
•
If the multicooker has switched to the keep warm
mode automatically, press and hold the «KEEP
WARM/STOP» button (11) for more than 2 seconds
to switch the keep warm mode off. The keep warm
mode indicator
will go out, the symbols «----»
will appear on the display (20) and the bowl bottom
temperature will appear on the display (19). After
that the unit will be switched to the standby mode.
To switch the keep warm mode on, press and hold the
«KEEP WARM/STOP» button (11) for more than 2 sec-
onds, the keep warm mode indicator
will light up on
the control panel (2), the symbols «00:00» will appear
on the display (20) and the count of the keep warm
time will start, the cooking program indicators will not
light up. The indicator
on the control panel (2) will
light constantly.
6. Changing the cooking time.
After the desired cooking program is selected (see
paragraph 2), the default cooking time for this program
will be shown on the display (20). To change the cook-
ing time, press the «TIME» button (13), the time sym-
bols on the display (20) will start flashing. Use the «-»
(18) and «+» (14) buttons to decrease or increase the
cooking time according to the table above. After set-
ting the cooking time press and hold the «START» but-
ton (15) for more than 2 seconds. The countdown of the
re-set cooking time will be shown on the display (20).
Note:
Press and hold down the «-» (18) and «+» (14)
buttons to set the time quicker.
7. Delayed start
Use this function if you want to delay the cooking start
for some time.
After selecting the desired cooking mode press the
«DELAYED START» button (17), the indicator
will light up on the control panel (2). Use the «-» (18)
and «+» (14) buttons to set the delayed start time. After
you finish setting the time, press and hold the «START»
button (15) for more than 2 seconds, the countdown of
the set time will start on the display (20) and the multi-
cooker will switch to the standby (delayed start) mode.
– the maximal delayed start time you can set is
24 hours;
– in the standby (delayed start) mode the time
remaining until the start of cooking will be shown
on the display (20).
– when the set time expires, the multicooker will start
cooking.
In the delayed start mode you can control the keep
warm mode. To do this, press the «START» button (15).
To cancel the delayed start, press and hold down the
«KEEP WARM/STOP» button (11) for more than 2 sec-
onds. The multicooker will switch back to the standby
mode and will be ready for selecting a new cooking
program.
IM VT-4277.indd 7
15.03.2019 12:05:59
