6
ENGLISH
•
Close the lid (4) until clicking.
•
Insert the power cord jack into the connector
(7) and the power cord plug into the socket.
BASIC FUNCTIONS OF THE MULTICOOKER
SWITCHING THE MULTICOOKER ON
(standby mode)
–
After connecting the multicooker to the mains
you will hear a sound signal, the symbols (16)
«- – - -» will appear on the control panel (2),
the «START/STOP» button (21) will be flashing.
After 30 seconds the symbols (16) «- – - -» will
go out, and the «START/STOP» button (21) illu-
mination will continue flashing.
–
The unit is switched to the standby mode and
is ready for use.
Note:
–
the operation mode buttons on the control
panel (2) are touch-sensitive, you just need
to touch the button to activate the neces-
sary mode;
–
touching of each button is accompanied by a
sound signal.
RICE COOKING PROGRAM
–
Load the rice into the bowl (11), set the bowl
(11) into the process chamber and close the
lid (4).
–
To switch the «Rice» cooking program on,
touch the button (21) «START/STOP» once in
the standby mode, the following symbols will
light up: «Rice» cooking program symbol (23),
the symbol (17) and moving symbols «- – - -»
will appear instead of the digital symbols (16).
–
After the required temperature is reached, the
digital symbols (16) of the «Rice» cooking pro-
gram runtime will appear.
–
After the «Rice» cooking program is over, you
will hear 5 sound signals, the multicooker will
be automatically switched to the keep warm
mode, the button (14) «KEEP WARM» illumi-
nation will light up, the digital symbols (16) will
show the keep warm mode runtime.
–
If you want the cooked rice to remain hot,
do not switch the multicooker off and do not
unplug it.
Note: – it is not recommended to use the keep
warm mode for a long time to avoid changing of
the flavor properties of the cooked rice.
–
To switch the multicooker off, press the but-
ton (21) «START/STOP» once, the multicooker
will switch to the standby mode.
–
Press the button (3), the lid (4) will open, be
careful to avoid burns by the outgoing steam.
Attention!
–
To avoid getting burns, be careful when
opening the lid (4).
–
Stir the cooked rice with the scoop (27).
–
Remove the bowl (11) from the multicooker,
taking it by the handles (10) using pot-
holders.
–
Remove the cooked rice from the bowl (11).
–
Wait until the bowl (11) cools down, wash it
with warm water and neutral detergent, rinse
and dry.
Another way to activate the «Rice»
cooking program
–
In the standby mode, press the button (22)
«MENU», the flashing symbol (23) of the
«Rice» cooking program will light up, the but-
ton (13) «TEMPERATURE/DELAYED START»
will be flashing, the symbols «- – - -» will
appear instead of the digital symbols (16).
–
To set the delayed start time, press the button
(13) «TEMPERATURE/DELAYED START» once,
the symbol (18) will light up and start flashing,
set the delayed start time from 1 to 24 hours
with the buttons (25).
–
Switch the multicooker on by pressing the
button (21) «START/STOP», the cooking time/
delayed start symbol (17) will light up and start
flashing, the digital symbols (16) will show
the time remaining to the delayed start of the
«Rice» cooking program.
–
After you set the delayed start time, switch
the multicooker on by pressing the button
(21) «START/STOP», the symbol (18) will glow
constantly and the symbol (17) will be flash-
ing, the delayed start time symbols (16) will
glow constantly. When the delayed start time
elapses, the multicooker will be switched on
and start cooking according to the «RICE»
program, the symbol (18) will go out and the
symbol (17) will glow constantly.
–
After the required temperature is reached, the
digital symbols (16) of the «Rice» cooking pro-
gram operation time will appear.
–
After the «Rice» cooking program is over, you
will hear 5 sound signals, the multicooker will
be automatically switched to the keep warm
mode, the button (14) «KEEP WARM» illumi-
nation will light up, the digital symbols (16) will
show the keep warm mode runtime.
IM VT-4279.indd 6
15.12.2017 12:58:18
