Vitek VT-4280 BN Manual Instruction Download

Page: 6 / 60

ENGLISH

–

if you steam products, pour water into the bowl
(10) so that boiling water doesn't reach the bot-
tom of the basket (20). Put the food into the
basket (20) and place it into the bowl (10).

•

Close the lid (3) until clicking.

•

Insert the power cord (24) jack into the con-
nector (7) and the power cord (24) plug into
the socket.

BASIC FUNCTIONS OF THE MULTICOOKER –
SWITCHING THE MULTICOOKER ON
(standby mode)

–

After connecting the multicooker to the mains
you  will  hear  a  sound  signal,  the  symbols
«-  -  -  -»  will  appear  on  the  display  (15),
the  "Start/Stop"  button  (16)  indicator  will
be  flashing.  After  10  seconds  the  symbols
«- - - -» will go out, and the "Start/Stop" but-
ton (16) illumination will continue flashing.

–

The unit is switched to the standby mode and
is ready for use.

Note:

–

pressing of the active button is accompanied
by a sound signal.

RICE COOKING PROGRAM

–

Load the rice into the bowl (10), set the
bowl (10) into the process chamber and close
the lid (3).

–

To switch the "Rice" cooking program on
press the "Start/Stop" button (16) once in
the standby mode, the following symbols will
light up: "Rice" cooking program (19) symbol,
the moving symbols «- - - -» will appear on the
display (15).

–

After the required temperature is reached,
the digital symbols of the remaining cook-
ing time in the "Rice" program will appear on
the display.

–

After the "Rice" cooking program is finished
you will hear sound signals, the multicooker
will be automatically switched to the keep
warm mode, the "Warming/Temperature"
button (14) illumination will light up, the digi-
tal symbols on the display (15) will show the
operation time in the keep warm mode.

–

If you want the cooked rice to remain hot,
do not switch the multicooker off and do not
unplug it.

Note:

- it is recommended not to use the keep

warm mode for a long time to avoid changing of
the flavor properties of the cooked rice.

–

To switch the multicooker off press the "Start/
Stop" button (16) once, the multicooker will
switch to the standby mode.

–

Press the button (4), the lid (3) will open, be
careful to avoid burns by the outgoing steam.

Attention!

–

To avoid getting burns, be careful when
opening the lid (3).

–

Stir the cooked rice with the scooper (23).

–

Remove the bowl (10) from the multicooker
using the potholders.

–

Remove the cooked rice from the bowl (10).

–

Wait until the bowl (10) cools down, wash it
with warm water and neutral detergent, rinse
and dry.

"Rice" cooking program version 2

–

In the standby mode press the "Menu" but-
ton (17), the "Rice" cooking program (19)
symbol will light up. Press the "Start/Stop"
button (16), the moving symbols «- - - -» will
appear on the display (15).

–

To switch the multicooker off press the "Start/
Stop" button (16) once, the multicooker will
switch to the standby mode.

SELECTING THE COOKING PROGRAM
AND SWITCHING IT ON

–

To select a cooking program press the
"Menu" button (17).

–

The cooking program selection is looped, the
cooking programs (19) will alternately light up
on the control panel (2) and the default cook-
ing time digital symbols will be shown on the
display (15).

–

After you select the desired cooking pro-
gram, the default program operation time will
appear. To change the cooking time press
one of the buttons (12 or 18) «+» or «-».

–

After selecting the cooking program you can
use the delayed start function (see the table
"Cooking programs and duration). To do
this, press the "Delayed start" button (13),
the button (13) indicator will be flashing and
the default delayed start time «1:00» will be

IM VT-4280.indd 6

29.03.2018 15:55:53