Vitek VT-4281 W Manual Instruction Download

Page: 10 / 80

ENGLISH

Special cooking time and temperature are avail-
able for each function.

–

Put the products into the bowl (7), do not
exceed 1/2 of the maximal capacity of the
bowl (7).

–

Install the bowl (7) in the process chamber.
Make sure that the outer surface of the bowl
is clean and dry, and the bowl itself is placed
evenly and is in secure contact with the heat-
ing element surface.

–

Do not close the lid (6).

–

Plug the power cord into the mains socket,
you will hear a sound signal, the display (3) will
show the sleep mode symbols «- - - -».

–

Press the button (20) «ROASTING», the button
(20) illumination will be flashing, the symbol
(15) «MEAT» will light up, and the default time
«0:35» will be shown on the display.

–

Depending on the added ingredients, press
the button (20) «ROASTING» consequently,
the symbols (15) «CHICKEN-FISH-MEAT» will
alternately light up.

–

For each product there is a default cooking
time (see the table «COOKING PROGRAMS»).

–

If  necessary,  set  different  cooking  time  (see
the  table  «COOKING  PROGRAMS»)  with  the
buttons  (16-17),  the  set  cooking  time  will  be
shown on the display (3).

–

Switch  the  «ROASTING»  program  on  by
pressing  the  button  (10)  «START/STOP»,
the  «ROASTING»  button  (20)  illumination  will
glow  constantly,  the  digital  symbols  «HEAt»
will  appear  on  the  display  (3),  and  after  the
set  temperature  is  reached,  the  display  (3)
will  show  the  remaining  operation  time  digi-
tal symbols.

Note:

–

the «ROASTING» program operates similarly
to a kitchen stove, always watch the cooking
process and stir the products during roasting
with the plastic spatula (26);

–

during the operation of the «Roasting» pro-
gram, do not bend over the multicooker bowl
to avoid burns by splashing hot oil;

–

after  the  «ROASTING»  program  is  finished,
you  will  hear  sound  signals,  the  multicooker
will  switch  to  the  sleep  mode,  the  symbols
«- - - -» will appear on the display (3). Unplug
the unit.

–

If  you  need  to  switch  the  multicooker  off
before  the  «ROASTING»  program  is  finished,
press the button (10) «START/STOP», the mul-
ticooker  will  switch  to  the  sleep  mode,  the

symbols «- - - -» will appear on the display (3).
Unplug the unit.

–

Remove the bowl (7) from the multicooker
using the potholders.

–

Remove the cooked products from the
bowl (7).

–

Wait until the bowl (7) cools down, wash it
with warm water and neutral detergent, rinse
and dry.

«STEWING» program (22)

«STEWING» cooking program has additional func-
tions for cooking meat, chicken or fish. Special
cooking time and temperature are available for
each function.

–

Put the required ingredients (see the Recipe
book) into the bowl (7) and add the neces-
sary amount of water, do not exceed 4/5 of the
maximal capacity of the bowl (7).

–

Close the lid (6) until the lock clicks.

–

Plug the power cord into the mains socket,
you will hear a sound signal, the display (3) will
show the sleep mode symbols «- - - -».

–

Press the button (22) «STEWING», the button
(22) illumination will be flashing, the symbol
(15) «MEAT» will light up, and the default time
«0:35» will be shown on the display.

–

Depending on the added ingredients, press
the button (22) «STEWING» consequently,
the symbols (15) «CHICKEN-FISH-MEAT» will
alternately light up.

–

For each product there is a default cooking
time (see the table «COOKING PROGRAMS»).

–

If  necessary,  set  different  cooking  time  (see
the  table  «COOKING  PROGRAMS»)  with  the
buttons  (16-17),  the  set  cooking  time  will  be
shown on the display (3).

–

If necessary, press the button (24) «DELAYED
START» and set the necessary delayed start
time with the buttons (16 - 17) (see the table
«COOKING PROGRAMS»).

Note:

- if you set the «DELAYED START» program,

then after the multicooker is switched on the dig-
ital symbols of the delayed start time will appear
on the display (3). After the delayed start time is
over, the «STEWING» cooking program will start.

–

Switch the cooking program on by pressing the
button (10) «START/STOP», the «STEWING»

IM VT-4281.indd 10

26.12.2017 11:35:42