Vitek VT-4281 W Manual Instruction Download

Page: 5 / 80

ENGLISH

–

Open the lid (6) by pressing the button (4) and
remove the bowl (7).

–

Wash  all  removable  parts  with  a  soft  sponge
and  a  neutral  detergent:  the  bowl  (7),
the  steam rack (27), the spatula (26) and the
measuring  cup  (25).  Then  rinse  them  under
running water and dry.

–

Wipe the multicooker body (1) and the lid (6)
with a damp cloth, then wipe it dry.

RULES OF USING OF THE COOKING
BOWL (7)

•

Use the multicooker bowl (7) for its intended
purpose only. Do not place it on heating units
or cooking surfaces.

•

Do not replace the bowl (7) with another con-
tainer.

•

Always make sure that the heating element
surface and the bottom of the bowl (7) are
clean and dry.

•

Do not use the bowl (7) as a container for mix-
ing products.

•

Never chop products directly in the bowl (7)
to avoid damage of the non-stick coating.

•

Never leave and keep any foreign objects
in the bowl (7).

•

During cooking stir the products only with
a plastic spatula (26).

•

Do not use metal objects that can damage the
non-stick coating of the bowl (7).

•

Wash the bowl (7) right after cooking.

•

Do not put the bowl (7) under a cold water jet
right after cooking, first let the bowl (7) cool
down to room temperature.

•

The bowl (7) is not intended for washing in
a dishwashing machine.

SHORT DESCRIPTION OF CONTROL PANEL
BUTTONS (2)

Note:

–

the operation mode buttons on the control
panel (2) are sensory, you just need to touch
the button to switch the necessary operation
mode on.

–

pressing of each button is accompanied by
a sound signal.

«START/STOP» button (10)

–

Insert the plug of the power cord (9) into the
mains socket. You will hear a sound signal, the
standby mode symbols «- - - -» will be shown
on the display (3).

–

Press  the  required  cooking  program  button,
the  button  illumination  will  be  flashing,  and
the  flashing  digital  symbols  of  the  cooking
program  will  appear  on  the  display  (3),  the
cooking  time  is  set  by  default  (see  the  table
«COOKING PROGRAMS»).

–

After  you  select  the  cooking  program,  press
the  button  (10)  «START/STOP»  to  switch  the
multicooker  on,  the  cooking  program  button
illumination  will  be  glowing  constantly,  the
remaining cooking time digital indications will
be shown on the display (3).

–

To switch the cooking program off and set the
multicooker to the standby mode press the
button (10) «START/STOP», you will hear a
sound signal, the multicooker will be switched
off and the standby mode symbols «- - - -» will
appear on the display (3).

«KEEP WARM» button (11)

–

after  the  cooking  program  is  finished  you
will  hear  sound  signals,  the  multicooker  will
be  automatically  switched  to  the  keep  warm
mode. the button (11) illumination will light up,
the display (3) will show the operation time in
the keep warm mode.

–

To switch the keep warm mode off press the
button (10) «START/STOP», the multicooker
will switch to the standby mode «- - - -».

–

If you want to switch the keep warm mode on,
press the button (11) «KEEP WARM», the but-
ton (11) «KEEP WARM» illumination will light up
and start flashing, the flashing digital symbols
of the default keep warm mode operation time
«4:00» will appear on the display (3). You can
set the required keep warm mode operation
time with the buttons (16, 17) (see the table
«COOKING PROGRAMS»).

–

Switch the keep warm mode on by pressing
the  button  (10)  «START/STOP»,  the  button
(11)  illumination  will  be  glowing  constantly
and  the  remaining  time  of  the  keep  warm
mode operation will be shown on the display.

Cooking program selection buttons
(12, 13, 14, 18 (light indicators 15),
19, 20, 21, 22, 23).

–

When you press the cooking program button,
the selected program button illumination will
light up and start flashing, the default cooking
time will be shown on the display (3), except
the «RICE» program (see the table «COOKING
PROGRAMS»).

IM VT-4281.indd 5

26.12.2017 11:35:42