ENGLISH
6
– To reset minimal and maximal tempera-
ture indications press the button (15 or 17)
“UP or MEM” once, the symbols “MAX”
will appear on the display, press the but-
ton (15 or 17) “UP or MEM” again and hold
it, the maximal temperature indications
will be reset. To reset the minimal tem-
perature indication press the button (15
or 17) “UP or MEM” twice, the symbols
“MIN” will appear on the display, press the
button (15 or 17) “UP or MEM” again and
hold it, the minimal temperature indica-
tions will be reset.
Note: - you can completely reset maximal
and minimal temperature values by remov-
ing the batteries from the battery compart-
ment; after installing them set the current
time, date and alarm actuation time.
Weather forecast
– Depending on the weather the following
weather forecast symbols (6) appear on
the display (1):
Sunny
Partly cloudy
Cloudy
Rain
Snowfall
Note:
– the weather forecast accuracy is about
50%, at sudden change of weather the
forecast accuracy increases;
– the weather forecast on the weather sta-
tion display may not match the current
weather conditions, in this case we recom-
mend trusting the local weather forecast;
– the symbol “Sunny” means sunny
weather at night as well.
Switching the display illumination on
To switch the display illumination (1) on press
the button (7) “SNOOZE/LIGHT”, the illumi-
nation will light up for 5 seconds.
– Unfold the base (11) and install the main
unit (10) to the desired place, if neces-
sary you can hang the main unit (10) on
the wall using the hanging places (13, 20).
Selecting the data reception channel
– Press the button (18) “CH” to select the
number of the data reception channel,
for instance, “CH1”; three data reception
channels “CH1, CH2, CH3” are available,
the data reception indicator and the chan-
nel numbers are shown on the display (1)
as the symbols (4a).
– Unfold the base (11) and install the main
unit (10) to the desired place, if neces-
sary you can hang the main unit (10) on
the wall using the hanging places (13, 20).
External sensor (21)
The weather station can receive three data
transmission channels from the external sen-
sor (21). The channel numbers should match
both on the main unit (10) and the exter-
nal sensor (21). To select a data reception
channel on the main unit (10) consequently
press the button (18) “CH”, the data recep-
tion channels “CH 1-2-3”” (4a) will change
on the display (1).
– Open the battery compartment lid (29)
and install two “AAA” batteries (not sup-
plied), strictly following the polarity, the
display (22) will show the digital temper-
IM VT-6410.indd 6
20.02.2018 10:03:51
