6
ENGLISH
USAGE
To get the best results, wash your hair with shampoo, wipe
it with a dry towel, dry with a hairdryer and comb your hair.
After that you can start styling your hair.
– Divide the hair into locks 4-5 cm wide.
– Put the unit on the safety stand (3) on a flat heat-resis-
tant surface.
– Insert the plug into the mains socket.
– Switch the unit on by pressing the power switch but-
ton (6) «
», the light indicator (5) will light up.
– Wait for some time required for the operation surface
(2) heating.
– Take a hair lock with the free hand.
– Press the clamp handle (4), place the end of the lock on
the operating surface (2) and move the clamp (4) down.
Holding onto the protecting tip (1) and handle (7), wind
the lock around the operating surface (2).
– Wait for a while, then press the clamp handle (4) and
release the hair lock.
– Repeat this procedure on the rest of your hair.
Notes:
– when using the unit for the first time, a foreign smell can
appear. It is normal.
– do not touch the operating surface (2) during the unit
operation, hold the unit by the protecting tip (1) with one
hand and by the handle with the other (7).
– during breaks in operation, place the unit on the safety
stand (3) on a flat heat-resistant surface.
– do not comb the hair right after curling it, let it cool
down, divide big locks into smaller ones carefully to
make the hairstyle look natural.
– After the operation switch the unit off by pressing the
power switch button (6) «
», and then unplug it.
– Put the unit on the safety stand (3) on a flat heat-resis-
tant surface and let it cool down completely.
CLEANING AND CARE
– Before cleaning unplug the unit and let it cool down
completely.
– Do not immerse the unit, power cord and power plug of
the unit into water or any other liquids.
IM VT-8295_70x130.indd 6
28.05.2019 9:39:35
