3
ENGLISH
IRON VT-8310
The iron is intended for ironing clothes, bedding and
for vertical steaming of fabrics.
DESCRIPTION
1.
Water spray nozzle
2.
Water inlet lid
3.
Continuous steam supply knob
4.
Water spray button
5.
Iron auto switch-off indicator
6.
Burst of steam button
7.
Power cord protection
8.
Base of the iron
9.
Heating element ON/OFF indicator
10.
Water tank
11.
Soleplate
12.
Temperature control knob
13.
Self-clean button «SelF CleaN»
14.
Water level mark «max»
15.
Beaker
ATTENTION!
For additional protection you can install a residual
current device (RCD) with nominal operation cur-
rent not exceeding 30 mA into the mains; contact a
specialist for installation.
SAFETY MEASURES
Before using the electrical unit, read this instruction
manual carefully and keep it for future reference.
Use the unit for its intended purpose only, as speci-
fied in this manual. Mishandling of the unit may lead
to its breakage and cause harm to the user or dam-
age to his/her property.
•
Before switching the unit on, make sure that
your home mains voltage corresponds to the
unit operating voltage.
•
The power cord is equipped with a euro plug; plug
it into the socket with reliable grounding contact.
•
To avoid fire, do not use adapters for plugging
the unit in.
•
To avoid mains overloading, do not switch on
several electrical appliances with high power
consumption at a time.
•
Do not fill the water tank with scented liquids,
vinegar, starch solution, descaling reagents,
chemicals, etc.
ATTENTION!
The surfaces of the iron warm up
during operation. Avoid contact of open skin areas
with the iron hot surfaces or outgoing steam to
avoid burns.
•
Do not let the power cord be on the ironing
board and touch hot surfaces.
•
Do not leave the unit unattended. During breaks
in operation, put the iron on the base (in verti-
cal position).
•
Before plugging/unplugging the iron, set the
temperature control knob to the minimum posi-
tion and switch the continuous steam sup-
ply off. always unplug the iron if you are not
using it.
•
To unplug the iron always hold the power plug,
never pull the power cord.
•
To avoid electric shock, do not immerse the iron,
the power cord and the plug into water or any
other liquids.
•
Before taking the iron away, let it cool down
completely and pour out the remaining water.
•
Clean the unit regularly.
•
Do not touch the unit body and the power plug
with wet hands.
•
Do not allow children to touch the unit body and
the power cord during the unit operation.
•
Do not leave children unattended to prevent
using the unit as a toy.
•
For children safety reasons do not leave poly-
ethylene bags, used as packaging, unattended.
Attention! Do not allow children to play with poly-
ethylene bags or packaging film. Danger of suf-
focation!
•
Close supervision is necessary when children
or disabled persons are near the operating
unit.
•
This unit is not intended for usage by children.
•
During the unit’s operation and breaks between
operation cycles, keep the unit away from
children.
•
The unit is not intended for usage by physi-
cally or mentally disabled persons (including
children) or by persons lacking experience or
knowledge if they are not under supervision of
a person who is responsible for their safety or
if they are not instructed by this person on the
usage of the unit.
•
Do not use the unit if the power cord or the plug
is damaged, if the unit works improperly or after
it was dropped or in case of leakage.
•
Do not attempt to repair the unit. Do not disas-
semble the unit by yourself, if any malfunction is
detected or after it was dropped, unplug the unit
and apply to any authorized service center from
the contact address list given in the warranty
certificate and on the website www.vitek.ru.
•
Transport the unit in the original package only.
•
Keep the unit out of reach of children and dis-
abled persons.
IM VT-8310.indd 3
12.11.2018 14:34:50
Summary of Contents for VT-8310
Page 1: ...1 VT 8310 Iron 3 7 12 17 22 IM VT 8310 indd 1 12 11 2018 14 34 50...
Page 2: ...1 2 3 4 8 9 11 7 15 10 14 12 13 5 6 IM VT 8310 indd 2 12 11 2018 14 34 50...
Page 26: ...26 8 1 1 1 220 240 50 2000 2400 info vitek ru 3 IM VT 8310 indd 26 12 11 2018 14 34 52...
