6
ENGLISH
•
If your hair has been dyed or permed, use the unit rarely.
•
For the best results the hair should be clean and dry.
•
Open the hair straightener moving the lock (4).
•
Put the unit on a flat steady and heat-resistant surface.
•
Plug the unit in and switch it on by turning the power
switch (3) clockwise, set the required temperature; the
power indicator (2) will light up and start flashing.
Note:
During the first operation some smell from the heat-
ing element is possible, this is normal.
Hair type
Temperature
Damaged, colored,
bleached, fine
from +100°С to +160°С
Normal
from +160° С to +180° С
For professional styling
from +180° С to +220° С
•
Let the unit heat up to the required temperature, the indi-
cator (2) will glow constantly.
•
Divide combed hair into locks of equal width (about
5 cm).
•
Place the hair lock between the plates (1).
•
Hold the unit by its handle (5) and press the plates (1)
together.
•
Slide the heating plates (1) with little force to the hair
tips.
IMPORTANT
: do not keep the plates on the same area of
the hair lock for more than 2 seconds.
•
After that start straightening the next hair lock.
•
Cool your hair down before final styling or applying hair
spray.
•
Avoid contact of heated surfaces with your face, neck
and other parts of your body.
•
After use set the power switch (4) to the position
«
» and take the power plug out of the socket. Let the
unit cool down.
Note:
– Always switch the unit off and unplug it if it is not used.
– Never leave the unit connected to the mains unattend-
ed; if you forgot to switch the unit off, it will be switched
off automatically in 45 minutes.
IM VT-8417_70x130.indd 6
15.05.2018 11:52:16
