18
2. Setting up the DVR
The following sections detail the initial setup of a DVR.
2-1. Setup – Main Screen
To enter the setup menu, right click on the mouse and select setup from the submenu or press the setup button on
the front panel or the remote control.
HD VIDEO INPUT
: Display a channel, total time, elapsed time, error count, active pixels, total pixels, active
lines, total lines and frame rate of HD channel (9~10).
CONTROL BAR AUTO HIDE
: Set to hide automatically or display continuously a control bar on the bottom
side in a Live mode.
CHANNEL INFORMATION
: Display a channel number, channel name, resolution, frame rate, quality and
recording type of each channel.
SYSTEM INFORMATION
: Display a software version, storage size, network type, IP address, MAC
address, DDNS status, DVR ID and remote controller ID of the system.
SYSTEM LOCK
: To lock the system, user input a password. To unlock the system, please press ESC
button on a front panel or a remote control. Then, the system will ask a password.
Use the Virtual Keyboard when you use front key and mouse. The factory default password is 1111.
It is highly recommended to assign a new password to protect the system. User can assign a new
password in SECURITY setup menu.
