21
2-2. Setup – DISPLAY Mode
In the SETUP menu, select the DISPLAY tab. Then, the DISPLAY menu is displayed as pictured below. Navigate through
the menu items using the mouse or the control button on the remote control and change the value of the menu item.
To return to the previous setup menu screen, press the ESC button.
Figure 2.2.1. Display Mode Setup Screen
Table 2.2.1. Menu Items in DISPLAY Mode Setup
Item
Description
OSD
Enable/disable on-screen-display.
Select ON: show it on the screen, Select OFF: Disappear on the screen.
OSD
CONTRAST
Set the visibility level of the On Screen Display (OSD).(0-100)
SEQUENCE
Enable/disable sequential display of video in full screen mode.
SEQ-DWELL
TIME
Set the dwell time of each, single channel display in sequential display mode
(3~60seconds)
CHANNEL
Select a channel for applying the following settings using the control button. Press SEL
button to change the channel.
NAME
Set the channel name. Press SEL button and set the channel name and select OK using
the control button.
