53
5. PTZ Control
To control the PTZ functions of the camera, select PTZ menu on the screen using the mouse. Select the
item you wish to control the PTZ camera and control them using the mouse or the control button on the
remote control. Please refer to the table 5.1. for the control.
Figure 5.1. PTZ
Control Screen
Table 5.1. Button Functions in PTZ Control
Item
Description
INITIALIZE
Initialize the PTZ settings of the selected camera.
PAN / TILT
Select PAN/TILT using the mouse or the control button (
◀
▲
▶
▼
) and press SEL button on the remote control. Adjust the
tilt(UP/DOWN) / pan(LEFT/RIGHT) position using the mouse or
the control button (
◀
▲
▶
▼
) on the remote control.
ZOOM /
FOCUS
Select ZOOM/FOCUS using the mouse or the control button (
◀
▲
▶
▼
) and press SEL button on the remote control. Adjust
the zoom(Mouse Wheel Down or Up/Down button of the remote
control)/focus(Mouse Wheel Up or Left/Right button of the
remote control)position.
OSD
Select the OSD to enter the menu. Control keys are Right, Left,
UP, Down, Select, Far (REW KEY), and Near (FF KEY). Press
the ESC button to return to the main menu. Press the PTZ
button to escape from the OSD menu.
AUTOSCAN
Press the right key (
▶
)
on the control button to start auto scan.
Press the left key (
◀
)
on the control button to stop auto scan.
PRESET
Select the PRESET and press the left key (
◀
)
on the control
button. Then, number input window will appear. Set the number
(3 digits) using the number key and press the SEL to set the
preset number for the current position.
Press the right key (
▶
)
on the control button and set the
number (3 digits) to go to the preset number.
TOUR
Select the TOUR and press the right key (
▶
)
on the control
button. Then, number input window will appear. Set the number
(1 digit) using the number key and press SEL to make the group
number work. Press the left key (
◀
)
on the control button to
stop tour. User can set the preset number in the tour group of
the OSD menu.
NUMBER
Avail
ble only on the TOUR and PRESET menu.
Press the ESC button to return to the main menu.
Preset/ Tour/ OSD/ Autoscan function are available on the specific model AP8777 and
PMA-200.
(Select it in the NAME of PTZ setup menu)
