84
8-7-3-3. PTZ
Setting the PTZ Control
: Sets the communication environment for remotely operating PTZ dome cameras connected
to RS485 terminals.
Camera channel designation
Name
: Sets the protocol type for the specified channel. When connecting multiple cameras, set the same protocol
for all.
Speed:
Sets the communication speed. The set value applies to all channels.
ID:
Sets the camera ID.
Apply
: Click APPLY to save the changes of the value.
8-7-4. Storage
Select
Storage
to configure continued recording settings by overwriting the hard disk and the storage period for the
recording data.
Overwrite
: To continue recording by overwriting when the hard disk becomes full, check the checkbox.
Record Limit
: Sets whether to limit or not the recording data storage period.
Record Limit Days
: Sets a recording data storage period.
S.M.A.R.T.:
Sets the TEMPERATURE LIMIT of the Hard Disk to trigger the ALARM and the BUZZER.
Apply
: Click APPLY to save the changes of the value.
