Assembly Instructions
These connectors comprise of 7 components: Body, Pin(2), Ferrule(2) & Strain relief sleeve(2) which are identified below.
1)
SLIDE THE STRAIN RELIEF SLEEVES AND THE FERRULES ONTO THE CABLE THEN TRIM THE CABLE
AS SHOWN TAKING CARE NOT TO NICK THE CENTRE CONDUCTOR OR BRAID.
2)
CRIMP THE PINS ONTO THE CENTRE CONDUCTORS.
Stripping tool part No:
VX1301
Crimp tool part No:
DCC1113
Vitelec Works, Station Road, Bordon, Hampshire, GU35 0LG, England
Tel: +44 (0)1420 488661 Fax: +44 (0)1420 488014
email: technical@vitelec.co.uk
Page 3 of 4
BNC Insulated crimp plug safernet adaptor for RG58 cable
Drawn by:
Checked by:
Description:
Revision: 1
Part No:
VBI114-58
type
Approved by:
26.03.99
Date:
PIN
BODY
MANDRIL
3mm
8mm
4mm
FERRULES
STRAIN RELIEFS
