P/11
P/12
PROGRAM "PORRIDGE"
1.
Press “Select Program” button and choose the PORRIDGE Function.
Automatic cooking time: 28 min. You can change it by adjusting the cooking
time 1-99 min).
2.
Press the START button to begin the process of heating, the display will flash
the characters: ----Warm-up time is set by the microprocessor, the process will
end automatically, but you can stop it by pressing keep warm / CANCEL.
3.
When finished the heating, the Multi-Cooker automatically switches to Keep
Warm: PORRIDGE indicator goes out, and Keep Warm starts flashing. Click
on the keep warm / CANCEL to turn off the heater and open the lid. Despite the
fact that the regime is willing to maintain the temperature of food for 8 hours or
more, do not leave food in this mode for a long time, it can lead to drying of the
product.
4.
Disconnect the unit from the mains.
PROGRAM "YOGURT"
1.
Arrange necessary ingredients for yogurt (100 ml natural yogurt for 1 liter of
milk) in small glass jars. In the bowl pour a small amount of water and the
ingredients to be put into the water.
2.
Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the bowl is in contact with the heating element.
3.
Close the cover until it clicks. If the lid is not closed properly, the program will
not function correctly.
4.
Connect the device to the mains.
5.
Press “Select Program” button and choose the Yogurt Function. Automatic
cooking time: 8 Hours. You can change it by adjusting the cooking time.
6.
Press the START button to begin the process of heating, the display will flash
the characters: ----
7.
Warm-up time is set by the microprocessor, the process will end
automatically, but you can stop it by pressing keep warm / CANCEL.
8.
When finished the heating, you will hear a beep. Open the lid. Cover the cups
with yogurt lids and store in the fridge to cool.
9.
Disconnect the unit from the mains.
PROGRAM "BAKE"
1.
Prepare the dough for as recommended by your chosen recipe.
2.
Grease the bowl with butter or margarine so that the baked product is easier to
take out of the bowl. Put the dough in a bowl and line it.
3.
Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
4.
Close the cover until it clicks. If the lid is not closed properly, the program will
not function correctly.
5.
Connect the device to the mains.
6.
Press “Select Program” button and choose the Bake Function. Automatic
cooking time: 20 Mins. You can change it by adjusting the cooking time.
7.
Press the START button to begin the process of heating, the display will flash
the characters: ----Warm-up time is set by the microprocessor, the process will
end automatically, but you can stop it by pressing keep warm / CANCEL.
8.
When finished the heating, you will hear a beep and the Multi-Cooker
automatically switches to Keep Warm: BAKE indicator goes out, and Keep
Warm starts flashing. Click on the keep warm / CANCEL to turn off the heater
and open the lid. Despite the fact that the regime is willing to maintain the
temperature of food for 8 hours or more, do not leave food in this mode for a
long time, it can lead to drying of the product.
9.
Disconnect the unit from the mains.
10.
After 2-3 minutes, remove the bowl from the housing. Then turn it upside down
on a tray or a grid.
Please put oven gloves or use oven gloves to remove the bowl. If the
cake is left in the bowl for a long time, baking can dampen. After baking
in the bowl may be left greasy stains - is permissible. Clean the bowl in
accordance with the section "Cleaning and care".
PROGRAM "ROAST"
1.
Put the necessary ingredients and spices in a bowl, cover with water. Make
sure that all the ingredients (including liquid) were below the MAX, is located
inside the bowl.
2.
Insert the bowl into the housing. Gently turn it counter-clockwise, make sure
that the cup is in contact with the heating element.
3.
Close the cover until it clicks. If the lid is not closed properly, the program will
not function correctly.
4.
Connect the device to the mains.
5.
Press “Select Program” button and choose the Roast Function. Automatic
cooking time: 3 Mins. You can change it by adjusting the cooking time.
6.
Press the START button to begin the process of heating, the display will show
the countdown.
www.vitesse.ru
