Use the “+” to increase the timer in 5 minute increments up to a maximum of 180
minutes. Use the “-“ to decrease the timer in 1 minute increments. Push and hold
the “+”/”-“ keys to quickly increase/decrease the timer setting.
Once the desired time is selected wait for the LED display to return to displaying the
HEAT/TEMP setting and indicator light.
The HEAT or TEMP setting can be changed whilst the timer is running however if
the control function is changed from HEAT to TEMP or vice versa the timer will
reset.
When the timer has expired an acoustic signal sounds and the unit will change to
standby mode. To cancel the TIMER, press the ON/STANDBY key twice or change
the control function.
Note:
Once the ON/STANDBY button has been pressed or the timer has expired,
the fan will run up to a maximum of 60 seconds to cool the induction hob before
switching off.
The maximum load for the cooking plate is 6 kg. Exceeded the maximum load will
damage the induction hob.
When using the Induction hob for the first time, a slight odour may be emitted. This
is normal and will soon subside. Allow for sufficient ventilation around the Induction
hob.
Maintenance
Disconnect the plug from the power supply and wait for the unit to cool fully before
cleaning. Clean after each use to avoid discoloration or stains.
Wipe down the unit using a dish washing agent and a damp cloth. Use vacuum
cleaner to suck up dirt from the air intake and exhaust vent.
Do not use fuel, paint thinner, scrubbing brushes or polishing powder to clean the
induction stove. Do not immerse the induction hob in water or run water over the top
of the induction hob.
4
