3
Always disconnect the appliance from the power supply before assembling,
disassembling or cleaning.
Do not immerse the motor unit, power supply cord or plug in water or any other
liquids. Care should be taken to avoid spillage on the electrical components, power
cord and plug.
Do not use any accessories or attachments with the appliance that have not been
supplied or recommended by the manufacturer.
Care should be taken when handling the sharp cutting blades, emptying the bowl
and during cleaning.
Caution:
Misuse of the appliance could cause injury – do not use the appliance for
anything other than its intended use.
This product is fitted with a thermal cut-out to stop the motor unit from overheating. If
the thermal cut out activates, disconnect the power supply and leave the Multi
Chopper & Blender to cool for 30 minutes.
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a
timer, or connected to a circuit that is regularly switched on and off by the utility.
Cleaning and Maintenance
Unplug the Multi Chopper & Blender from the mains power supply and allow to cool
fully before performing any cleaning or maintenance.
Disassemble the unit and clean each piece individually. All parts should be cleaned
immediately after use. The glass bowl, cover and blades should be hand washed
with mild detergent. Do not submerge the motor unit in any kind of liquid, clean it
with a damp cloth and a small amount of mild detergent.
Storage
When the unit is not in use, it should be stored safety. Turn the unit off, unplug the
power cord from the outlet and store the unit in a cool dry place.
4
Specifications
Rating:
220-240V ~ 50/60 Hz
Power: 400 W
Food Capacities
List of Parts
