19
MicroLinks Technology Co., Ltd.
(3)
Image Control and rotation Mode
: you can take the
machine by your left or right hand, adjust image direction of
yourself or object, as well as adjusting contrast, brightness and
exposure rate of the image. Please refer to the following image
for tools of Image Control Model.
(4)
Measurement Model
: the model can be used as rulers and
compasses. Further, the model can measure in the dynamic
(real-time image) or static (loaded images or frozen image)
images, as well as providing various measuring tools. Please
refer to the following image for tools of Measurement Model.
4.
Printed Notice
Please read the following information before operate.
4.1
Maintenance
Please abide by the following items while storing or using the
product:
(1)
Keep dry: do not place the product in a humid environment.
Dry surroundings are helpful to extend the life of the product.
(2)
Avoid temperature shock: temperature shock will cause
internal condensation inside the machine, for example, take
the product into a warm room from cold environment. Please
put the machine inside the protection bag or handbag in
advance to prevent temperature shock, and avoid using the
machine in an environment with over-high/low temperature.
(3)
Avoid collision and drop: the product might go wrong by
strong collision, vibration or distortion.
(4)
Shut down the machine before cutting off the power supply or
removing the battery: do not forced cut off the power supply
or remove the battery.
(5)
Do not make face lens against strong light or sunshine for long
time: Strong light rays might degrade sensitive elements and
generate white stain on the image.
(6)
Handle SD Card and movable parts carefully: do not force
disassemble SD card or squeeze screen, connection lines of
power supply and battery cover. Avoid contacting the lens
since they are subjected to damage.
(7)
Machine not in operation: please switch off power supply and
remove battery or unplug power cable, and store them in a dry
place with excellent ventilation. Do not expose the machine in
an environment lower than -5
℃
or higher than 50
℃
.
(8)
Appropriate storage: while carrying, please put the machine
inside the protection bag to prevent it from being damaged
