Instructions for Use
25
Initially only the general purpose VORTEX program is available on the unit,
which allows the user to freely change the vortexing speed and time settings.
→
→
→
The
Vortexer
page displays the current program settings, which can be
manually changed using the
Increase
and
Decrease
buttons below the
speed and time values.
Programs
Mute
Start
To vortex a tube, simply press the tube down onto the centre of the vortexer
pad and vortexing will automatically start at the programmed speed.
The timer will count down each second, and vortexing automatically stops
when the timer reaches zero or the tube is removed from the pad.
NOTE
The Co-mix unit has a vibration sensor which detects if the mixer
or vortexer has become unstable. If vortexing generates too much
vibration it will be automatically stopped and an E35 error will be
displayed. See Table 18 for error code descriptions.
Summary of Contents for Co-mix
Page 1: ...Instructions for Use...
