55
The drive shaft does not rotate with the clutch lever
engaged:
•
The clutch cable is damaged;
•
The gear
shift lever is set in “neutral” position;
•
Check and replace clutch cable;
•
Set the gear shift lever to position “1” or “2”;
WARRANTY CERTIFICATE
The warranty of this machine is two years from the date
of purchase. You should, therefore, keep your proof of
purchase during this period of time. The warranty
covers any manufacturing defect in material or
operating, as well as parts and work needed for their
recovery.
Excluded from the warranty the misuse of the product,
any repairs carried out by unauthorized individuals
(outside the service center of the brand VITO) as well as
any damage caused by the use of it.
DECLARATION OF CONFORMITY
We declare, under our sole responsibility, that the
product labelled VIMEDTD7A - DIESEL TILLER WITH
DIRECT TRANSMISSION complies with the following
standards
or
normative
documents:
EN
709:1997+A4:2009,
EN
709:1997+A4/AC
e
e24*2016/1628*2018/989EV1/D*0390*00,
as
per
defined by directives:
2006/42/EC
- The Machinery Directive
(EU) 2016/1628 & (EU) 2018/989
- Euro V Directive
S. João de Ver,
November 11, 2020
Central Lobão S.A.
Technical supervisor
Hugo Santos
