45
FREQUENTLY ASKED QUETIONS/ TROUBLESHOOTING
Question/problem - cause
Cause
Solution
The engine does not start:
•
There's no fuel in the carburetor;
•
There's no fuel in the tank;
Fuel line hose is clogged;
Fuel line hose incorrectly assembled or folded;
•
The fuel in the tank is of poor quality, has water, is
dirty or is already old;
•
The cap is off the spark plug;
Ignition cable is not properly connected;
•
The spark plug has soot or is damaged; Wrong
distance between the electrodes;
•
The air filter is dirty;
•
The fuel filter is clogged;
•
The combustion engine is “wet” due to many
attempts for starting it;
•
Press the carburetor primer bulb several times until
it is full of fuel;
•
Fill the tank with fuel;
Clean the fuel line hose;
Place the fuel hose correctly or straighten it;
•
Empty the fuel tank and carburetor primer bulb;
Use new fuel (proper mixture).
•
Fit the cap into the spark plug;
Check the connection between the ignition cable
and the plug;
•
Clean / replace the spark plug;
Adjust the distance between the electrodes;
•
Clean / replace the air filter;
•
Clean the fuel filter;
•
Loosen the spark plug and dry it, pull the recoil
starter several times with the spark plug unscrewed;
Low performance:
•
Improper fuel mixture;
•
Improper throttle cable adjustment;
•
Fuel filter or valves are clogged, carburetor defect;
•
Use appropriate fuel mixture;
•
Adjust the throttle cable;
•
Replace or repair faulty parts;
The engine runs irregularly and smokes:
•
The air filter is dirty;
•
Clean / replace the air filter;
The combustion engine overheats:
•
Ventilation slots are dirty;
•
Clean the ventilation slots;
Strong vibrations while operating:
•
Loose engine housing;
•
Fasten the engine fixing screws;
The saw chain does not rotate:
•
Check that the safety brake is not engaged;
•
Pull towards the engine;
The guide bar and the saw chain overheat:
•
Lack of oil in the tank;
•
Saw chain is too tight;
•
Obstruction in the lubricating nozzle;
•
Fill;
•
Release a little;
•
Clean the nozzle;
Chain brake lever does not work:
•
Faulty mechanism;
•
Contact an authorized service center;
Summary of Contents for VIMS45B
