Instruction and operating guideline CO-detector
Type:
VCD2 CO-Detector
2
Table of contents
1. General Assembly Instructions. ................................................................ 3
1.2 Electrical Connection (referring to NEN 1010) ........................................ 3
1.3 Mechanical Connections ...................................................................... 3
5. The functioning of the CO detector. .......................................................... 6
5.1 The reaction of the CO detector to CO is as follows: ............................... 6
5.2 In the case of a cable breakage and sensor malfunction. ........................ 6
5.8 Monitoring the closed position of the chimney valve. .............................. 7
6. Commissioning the VCD2 ........................................................................ 7
6.1. Inspecting the VCD2 ......................................................................... 7
6.2 Testing after leaving the factory .......................................................... 7
8. Diagram on how to connect the CO detector to the chimney. ....................... 8
9.1 Calibration of the VCD2 ...................................................................... 9
9.2 Technical instruction manual service technicians .................................. 10
All rights reserved. No part of this publication may be reproduced and/or published by means of
printing, photocopying, micro film or in any other way, without the prior written permission of
Vitotherm BV. This also applies to the accompanying drawings and diagrams.
Vitotherm BV reserves the right to change parts of this manual at any time without prior or direct
notice to the customer. The content of this instruction manual can also be changed without prior
warning.
This instruction manual applies to the VitoTherm CO detector. Consequently, Vitotherm BV cannot
be held liable for any damage resulting from the improper use of the CO detector. Improper use
means using the device for purposes other than those stated in this instruction manual. The
removal or alteration of parts of the CO detector also falls under the concept of improper use.
Please contact the Vitotherm BV Service Department for information regarding settings,
maintenance activities or repairs, as this is not provided in this instruction manual.
Although great care was taken in the compilation of this instruction manual, Vitotherm BV cannot
accept any responsibility in respect of possible errors in this instruction manual or any results
thereof.
