VTouch Pro Implementation Architecture
10
VBox Pro Smart Home Wireless Controller - Installation Guide
3
VTouch Pro Implementation Architecture
The VTouch Pro system architecture can be implemented in the smart home network in
three ways: Stand-alone, VTouch Pro with Wi-Fi environment and VTouch Pro with 3
rd
party integration. This section explains these implementation diagrams.
3.1
Stand-Alone
Figure 4 shows how the VTouch Pro system is implemented as a stand-alone
architecture.
The VTouch Pro system can be operated independently without the need for any other
system such as a home wireless network or the Internet.
The system architecture consists of the VBox Pro wireless controller and the VTouch Pro
electrical switches. In this architecture, there is no connection between the VTouch Pro
system and the home network, or the Internet.
The mobile application cannot be used in this architecture because there is no Wi-Fi
communication in this architecture. However, all the scenarios will be operated (triggered)
by the touch switches.
Figure 4: VBox Pro Stand-alone connection diagram
