1
Introduction
The Vitrek 944i Dielectric Analyzer combines the four basic dielectric tests into one compact, easy to use, feature-rich instrument.
The 944i's standard multi-function capabilities include - AC and DC Dielectric strength testing, Insulation Resistance (IR)
measurement to 100 gigaohms and Earth Continuity measurement down to 10 milliohms. All of these tests can be run in either
manual or automatic mode, as well as, via remote control using the optional IEEE-488.2 (GPIB), RS-232C or parallel
communication ports.
Vitrek has taken advantage of advanced microprocessor and ASIC technologies in order to reduce the size and complexity of the
944i while increasing reliability and functionality when compared to traditional hi-pot testers. Operating the 944i is easier than
ever due to extensive menu prompting on the unit's brilliant 40 character back-lit LCD. Built-in test procedure storage and edit
capability increases test throughput and reduces test development time. Internal diagnostics ensure that the 944i is properly
functioning at all times while the automatic calibration capability maintains highest possible systems accuracy.
Read the Vitrek 944i manual carefully before operating the instrument. Should you have any questions, Please contact your local
Vitrek Service Center or Vitrek Customer Satisfaction Department at 9880A Via Pasar, San Diego, CA 92126 phone (858)689-
2755 fax (858)689-2760.
Certification
Vitrek Corporation certifies that this instrument was thoroughly tested and inspected and found to meet published specifications
when shipped from the factory. Vitrek Corporation further certifies that the calibration of this instrument is traceable to the
National Institute of Standards and Technology to the extent allowed by NIST's calibration facility.
Limited Warranty
The warranty period for this instrument is stated on your invoice and packing list. Please refer to these documents to
determine appropriate warranty dates. Vitrek warrants to the original purchaser that this product will be free from defects in
material and workmanship under normal use throughout the warranty period. Vitrek Corporation's liability under this
warranty is limited solely to the repair or replacement of this instrument during the warranty period, provided it is returned to
the factory freight prepaid with return authorization number. And provided that such defects are not determined by Vitrek to
have been caused by abuse, misuse, alteration, improper installation, neglect or environmental conditions. No other warranty
is expressed or implied. Vitrek Corporation is not liable for incidental, consequential, direct or indirect damages or for costs,
losses or expenses of any kind. A return authorization number must be obtained directly from the factory for warranty
repairs. No liability will be accepted if returned without factory authorization number.
