95x Series Operating Manual - May 17, 2022
Page
30
of
155
o
KEY BEEPS
. This allows the user to set the volume of the beep sounds made by the 95x
whenever a key is pressed.
o
TIME FORMAT
. This allows the user to select whether the 95x displays time in 12hour or 24hour
format.
o
SET TIME
. This allows the user to adjust the presently displayed time. The hour, minute and
second are separately adjusted using the Up and Down Arrow keys.
o
SET DATE
. This allows the user to adjust the presently displayed date. The day, month and year
are separately adjusted using the Up and Down Arrow keys.
•
When finished, press the
EXIT
key to exit this sub-menu, and then press
EXIT
again (if no additional
configuring is to be performed) to exit the main configuration menu and save the settings.
RETURNING ALL CONFIGURATION SETTINGS TO FACTORY DEFAULTS
The user may return all configuration settings to the factory default settings as follows
–
•
Ensure that the display indicates that the 95x is in the base menu state, i.e., the display shows the date
and time. If necessary, press the
STOP
button to abort a menu and return to the base menu state.
•
Press the
CNFG
key.
•
The display now shows the main configuration menu, an example of which is
–
TEST…
PRINTOUT…
SYSTEM…
INT
ERFACES…
DIGITAL I/O…
BUILD…
SET TO DEFAULTS…
LOCK PASSWORD:000000
RELOCK…
•
Using the Left Arrow or Right Arrow keys as needed, change the selection point to the SET TO DEFAULTS
line.
•
Press the
ENTER
key.
•
The 95x now displays a message temporarily and remains in the main configuration menu, allowing the
user to override the factory settings as needed. If no further changes are needed, press the
EXIT
key to
save the changes and return to the base menu state.
