2000I & 2000M Instrument’s User Guide, Revision B
44
Editing Memory Steps
1.
Press the MNU
key twice. The display now shows the choice:
< Edit Memory >
2.
Press any of the ENTER
keys to select this choice. The display now shows
the prompt for the memory step number to be edited, for example:
< Press Memory 5 >
3.
You may press the CLR or MNU keys at this time to terminate the procedure.
Press the numeric key corresponding to the memory to be edited. The display
now shows the present status of the selected memory step, either:
< Inactive >
or
< Active >
4.
The displayed status of the memory step may be toggled by pressing any of
the arrow keys or the MNU key. When the desired status is shown, press any
of the ENTER
keys to select. If the Inactive state was selected, the display
will return to the prompt (step 2 above):
< Press Memory 5 >
5.
The display then shows the presently stored output level, multiplier and unit.
The memory step number being edited is shown in the right-hand end of the
display.
6.
You may now enter the desired output level into the memory step. The mul-
tiplier used during this entry (if any) will be used for formatting the display
following recall of the step. The entry is terminated when a valid Units/Enter
key
(
V, A, ºC or ºF) is pressed. The display now shows the present selection
as to whether the instrument will be in the “Operate” or “Standby” state fol-
lowing recall of the step. The memory step being edited is shown in the
left-hand end of the display.
7.
You may toggle the displayed status for the memory step by pressing any of
the arrow keys or the MNU key. When the desired status displays, select it by
Summary of Contents for Xitron 2000 Series
