26
6000-2 & -3 User Guide, Rev E
DISPLAY SELECT
key again to place the cursor in the display. If you press the
ENTER
key twice the new data is applied and the display shows the Results Data.
Line #03 Parameter
p= Phs Bh01--Ah01
Display as +/-180
o
Filter = 30.000s
Figure 8. Display Line Configuration Data
Ø
To change a display line of Results Data:
1. While the display shows the Results Data screen, press the
DISPLAY SELECT
key
that corresponds to the display line requiring change. A display showing
parameter values will come up.
2. Press a corresponding
DISPLAY SELECT
key a second time. A cursor will flash in
the display line to allow you to:
•
Directly change the displayed information at the cursor.
•
Change the displayed selection to the next one available.
3. Use the
ç
and
è
keys to move the cursor to the data or option you wish to
change.
4. Use the
DATA ENTRY
keys to enter a value.
5. Press the
é
and
ê
keys to scroll the options, as required.
6. Press the
ENTER
key twice to apply the change.
Ø
To select an option:
1. From the Results Data display, press a
DISPLAY SELECT
key that correlates with
the line of Results Data you wish to modify. Refer to the
Display Select Keys
on
page 18.
2. From the Parameter display, press the
DISPLAY SELECT
key that correlates with
the line containing the option you wish to select, until the cursor flashes at the
option.
3. Use the
é
,
ê
,
ç
and
è
keys to select a new option. Press
ENTER
twice.
Summary of Contents for Xitron 6000-2
