32
6000-2 & -3 User Guide, Rev E
Ø
To format the time display:
1. From the
Set Time and Date
menu, press the
DISPLAY SELECT
key next to the
Time Format
line.
2. Repeated presses of the corresponding
DISPLAY SELECT
key will toggle the
display between the two choices of:
12 Hour
and
24 Hour
.
•
12 hour format is displayed as between:
12:00:00am and 12:59:59am—Or—01:00:00am and 11:59:59am
—Or—
12:00:00pm and 12:59:59pm—Or—01:00:00pm and 11:59:59pm.
•
24 hour format is displayed as between:
00:00:00 and 23:59:59
.
3. When the displayed menu has been altered to suit your requirements and even
though no cursor character is displayed, press the
ENTER
key to action any
changes made.
Ø
To set the date format:
1. From the
Set Time and Date
menu, press the
DISPLAY SELECT
key next to the
Date Format:
display line
.
2. Use the
ê
key to toggle between the three choices of:
dd/mm/yy
,
yy/mm/dd
,
and
mm/dd/yy
. Note that the displayed date is based on format.
3. To select a format, press the
ENTER
key, while the format shows in the display.
Ø
To set the date display:
1. From the
Set Time and Date
menu, press the
DISPLAY SELECT
key next to the
DATE
line.
2. Using the
DATA ENTRY
keys, enter all six digits of the present date. Follow the
format as defined in the
Date Format:
line.
3. Press the
ENTER
key to set the internal real time clock to the entered day, month,
and year.
Storing & Retrieving Configurations
This section describes, in detail, the Configuration menus that allow you to store and
retrieve configurations of the instrument. Maintenance of these storage areas is also
covered in this section. These menus are initiated using the
STORE
and
RECALL
keys
found in the
CONTROL
keypad.
Summary of Contents for Xitron 6000-2
