EN
EN
Appliance recess, with ventilated remote motor
The size of the front opening to be prepared for the recess for the appliance must
respect the dimensions of the refrigerator (see annex 1).
The recess must respect the minimum distances between the remote motor and the
surrounding structure and have suitable ventilation apertures communicating
directly with the free area of the premises, in order to obtain the correct circulation
of the air via forced ventilation, as indicated in fig 1d
The recess must ensure that all possible live parts of the appliance are not directly
accessible as well as the ventilation openings, by fitting them with suitable grilles.
The grilles must have apertures with max. dimension of 5 mm.
The ventilation apertures must have dimensions no smaller than 200x200mm and
must be positioned on both sides, according to figure 1d.
The minimum distance of the remote motor and the recess structure must not be
less than 75 mm. (fig. 1d)
Figure 1d
–
Grille position with ventilated remote motor
