Moster 185 Factory R - Maintenance manual - V1
9
•
Always start the engine on a flat and clean surface, without stones or sand. During all
phases in which the engine is kept running near the ground (such as heating, take off,
landing) it is necessary to maintain a safe distance from the engine. A good safety
distance is 100 meters in every direction.
The following engine speed limits must be respected to avoid engine failures, to keep the
warranty valid and to have a correct maintenance scheduling according to the Vittorazi
program:
•
Do not keep the engine at full revs for more than 60 seconds.
•
Do not keep revs higher than 7.000 RPM during long cruising flights or long climbs.
The average power delivered by the engine during a flight should remain below the
indicated threshold. Contact the aircraft manufacturer for further clarification.
The temperature limit of CHT is 220° Celsius. Do not persist above this temperature
threshold, engine overheating and irreversible damage could occur.
The use of an EGT instrument is mandatory. Install the sensor in the prearranged position of
the manifold (thread the hole according to the size of the sensor). The temperature limit of
EGT is 650° Celsius. Do not persist above this temperature threshold, engine overheating
and irreversible damage could occur.
The use of the head cooling shroud in combination with Vittorazi approved propellers is
mandatory in this model to ensure performance and correct engine temperatures.
Summary of Contents for Moster 185 Factory R
