Product Diagram
Refill Your Charger
To refill your charger, you will need the AC USB wall
outlet adapter you normally use to charge your cell
phone or other USB devices.
1. Insert the micro USB end of the provided cable into
the charger’s micro USB input port.
2. Connect the remaining USB end into your wall
outlet adapter.
3. The power level indicator lights will start moving.
If you have a 10W-2A USB wall outlet adapter, your
charger will reach 100% from 0% within 7 hours. With
a 5W-1A it will take approximately 12 hours.
Starting Instructions
Get additional instructions, videos, and activate your
product warranty by visiting:
viivant.com/start
Your charger is ready to use out of the box.
However, it is a good idea to give it a good 7-10
hour charge before first use.
Verify the charge level by pressing the power button.
You should see the LED light momentarily turn on.
w w w . v i i v a n t . c o m
3
Power Level Indicator
Output
vSmart 2.4A
Input micro USB to
refill the charger
Power Button
