Copyright © 2004, Vivato, Inc.
Vivato Wi-Fi AP/Bridge User Guide
41
Configuration Connections
Initial Configuration Using the Built-In Web Pages
Wireless Configuration Connection
Step 1.
Disconnect any wired network connections to your computer.
Step 2.
Turn your computer on and provide power to the AP/Bridge.
Step 3.
Enable your computer’s wireless client. In the Microsoft Windows environment, this
is typically done by selecting
Start > Settings >Network Connections > Wireless Network
Connection
.
Step 4.
If APIPA is being used to assign an IP address for the wireless interface, wait for the
DHCP server search to time-out and issue an address to the interface (about one minute).
If APIPA is not being used, assign a static IP address of 169.254.20.2 to your interface.
Step 5.
Using your client’s “Available Networks” or other search function, select the “
Vivato
”
entry.
Figure 3—
Wireless Connection to Access the Configuration Web Pages
Because the Wi-Fi AP/Bridge is delivered with wireless security disabled to allow configuration
through a wireless connection, you may need to confirm using an unsecured connection.
vivato
vivato
vivato
Check here to allow
connection to the Bridge/
Router without security.
Connect
Select “Connect”