background image

Copyright © 2004, Vivato, Inc.

Vivato Wi-Fi AP/Bridge User Guide

43

Entering the Initial Configuration Information in the Quick Setup 

Pages

Initial Configuration Using the Built-In Web Pages

Entering the Initial Configuration Information in the Quick Setup Pages

Enter the information in the 

Setup Type 

screen and select 

Continue

 to continue to the 

Read Password

 

settings. Continue to fill in the requested information on each screen until all of the Quick Setup screens 
have been configured and the Wi-Fi AP/Bridge is rebooted using the new settings. It is important that 
you do this before proceeding to change any other configuration settings when you first configure the 
Vivato Wi-Fi AP/Bridge. 

The Quick Setup screens are displayed automatically the first time you access the configuration web 
pages. To access the Quick Setup screens at a later time, select 

Quick Setup

 on the 

Home

 configuration 

page.

Setup Type

The settings made on the Quick Setup screens can be used to configure the Wi-Fi AP/Bridge before 
using it, or to create a template to use as a starting point for future configuration.

Quick Setup Type

 

Select “

local

” to use the Quick Setup settings to configure the Wi-Fi AP/Bridge. 

Select “

save locally as template

” to save the Quick Setup configuration as a file called 

“template-config” without actually changing the AP/Bridge’s configuration. This allows 
you to create a configuration file to use as a base line for configuring other Wi-Fi 
AP/Bridges, or to use this file in the future to configure this Wi-Fi by renaming it 
“startup-config” and rebooting this AP/Bridge.

Summary of Contents for VA2200















































































Reviews: