ENG
VIVAX
14
You must have a gap of a least 25 mm and at most 74 mm between the
underneath of the appliance and any surface that is below it.
Installing the appliance
With Steel hob
To prevent leakage of liquid between the
frame of the hob and the work surface, put the
insulating seal provided in position before
assembly.
1. Install the product into countertop and use
a pencil to draw a line along the product
outer edges.
2. Take out the product and place the
adhesive seal provided along the line you
draw by step 1. Use light pressure to make
the seal stick to the worktop.
3. Install the product again, Use light pressure
to make the seal stick to product edge.
4. Carefully trim the surplus edge away from
the seal.
5. Cleaning.
Do not use a silicon sealant to seal
the appliance against the aperture.
This will make it difficult to remove
the appliance from the aperture in
future, particularly if it needs to be
serviced.
Summary of Contents for BH-312EI X
