-16-
Trouble Shooting
Under the proper circumstances, your Vacuum Sealer will give you many top-notch
vacuum performance. In some instances, problems may arise. Please consult
the trouble shooting menu before calling customer support.
Note: In order to protect the machine, we set at least 4 seconds (non working)
between every time the seal wire heats; and every 10 times continually
working, if the total non working time is less than 135 seconds, the machine
will go into a protective mode, indicated light shines, machine will have to rest
at least 2 minutes then the indicated light is back to normal, machine can start
working again.
The Vacuum Sealer
won’t turn on
▪
Ensure that the machine is properly plugged into a grounded outlet.
▪
Check the power cord for tears and frays. Do not use machine if power cord
is
damaged.
The Vacuum Sealer
doesn’t pull a complete vacuum with bags
▪
To vacuum and seal properly, edge of bag must be within the sealing strip.
Make sure bag is inside the chamber ring and that there are no wrinkles in
the bag along the seal bar.
▪
If packaging from a roll bag, make sure first seal is complete and that there
are no gaps in either seal.
▪
The Vacuum Sealer and vacuum bag need to be clean, dry and free of debris for
Summary of Contents for VS-110
