-15-
Trouble Shooting
Under the proper circumstances, your Vacuum Sealer will give you many top-notch
vacuum performances. In some instances, problems may arise. Please consult the
trouble shooting menu before calling customer support.
Note:
In order to maintain a longer lifetime, we strongly recommend to stop at
least 20 seconds between each seal.
The Vacuum Sealer
won’t turn on
▪ Ensure that the machine is properly plugged into a grounded outlet.
▪ Check the power cord for tears and frays. Do not use machine if power cord
is damaged.
The Vacuum Sealer
doesn’t pull a complete vacuum with bags
▪ To vacuum and seal properly, edge of bag must be across the seal bar. Make
sure bag is inside the chamber seal gasket and that there are no wrinkles in
the bag along the seal bar.
▪ If packaging from a roll bag, make sure first seal is complete and that there are
no gaps in either seal.
▪ The Vacuum Sealer and vacuum bag need to be clean, dry and free of debris
for the vacuum process to be successful. Wipe surface of seal bar and inside
of bag and try again.
Vacuum bag loses vacuum after being sealed
Summary of Contents for VS-1101
