VIVAX
ENG
12
INSTALLATION
Installation area
Before installing the machine, the location
characterized As follows shall be selected:
1. Rigid, dry, and level surface
2. Avoid direct sunlight
3. Sufficient ventilation
4. Room temperature is above 0
Ԩ
5. Keep far away from the heat resources such
as coal or gas.
Unpacking the Washing Machine
1. Remove the cardboard box and styrofoam packing.
2. Lift the washing machine and remove the base packing. Make sure the
small triangle foam is removed with the bottom one together. If not, lay
the unit down with side surface, then remove the small foam from the
unit bottom manually.
3. Remove the tape securing the power supply cord and drain hose.
4.
Remove the inlet hose from the drum.
Stability is important to prevent the product
from wandering!
Make sure that the product should not stand
on the power cord
Warning
Packaging material (e.g. Films, Styrofoam)
can be dangerous for children.
There is a risk of suffocation! Keep all
packaging well away from children
Warning
Summary of Contents for WTL-120715B
