Programming
Programming
Programming
Programming
Set Time
1.
Press
TIME
2.
Day of the week will be flashing. Use the or key
to select the current day of the week.
3.
Press
PROGRAM
4.
The current hour is flashing. Use the or key to
select the current hour. When using 12-hour time, make sure
the correct a.m. or p.m. choice is selected.
5.
Press
PROGRAM
6.
Minutes are now flashing. Use the or key to
select current minutes.
8.
Press the
TIME
button in order to go back a step.
7.
Press
HOLD/RUN
when completed.
Programming
All of our programmable thermostats are shipped with an
energy saving pre-program. You can customize this default
program by following the steps on page 14.
Your thermostat can be programmed to have all the weekdays
the same, a seperate program for Saturday, and a seperate
program for Sunday. There are four time periods for each
program
(WAKE, LEAVE, RETURN, SLEEP).
Set Program Schedule
1.
Select
HEAT
or
COOL
with the system switch.
Note:
You have
to program heat and cool each seperately.
2.
Press the
PROGRAM
3.
Monday-Friday is displayed and
WAKE
is shown. You are now
programming the wake time period for the weekday setting.
4.
Time is flashing. Use the or key to make your time
selection for the weekday
WAKE
time period.
5.
Press
PROGRAM
6.
The setpoint temperature is flashing. Use the or key
to make your setpoint selection for the weekday wake period.
7.
Press
PROGRAM
8.
Repeat steps 4 thru 7 for weekday
LEAVE
time period, for
weekday
RETURN
time period, and for weekday
SLEEP
time
period.
To customize your program schedule, follow these steps
Weekday:
Repeat steps 4 thru 7 for the Saturday
WAKE
time period,
LEAVE
time period,
RETURN
time period, and for the Saturday
SLEEP
time period.
Saturday:
Repeat steps 4 thru 7 for the Sunday
WAKE
time period,
LEAVE
time period,
RETURN
time period, and for the Sunday
SLEEP
time period.
Sunday:
You can use the table below to plan your customized program schedule.
If using 7-Day Programming use previous steps for
every individual day.
