background image

Thermostat Quick Reference

4

5

Thermostat Quick Reference

The low battery icon is displayed when the AA battery power is low. Whenever the 

thermostat detects low battery voltage from the AA batteries, the low battery icon 

will begin flashing on the screen for 21 days (if the batteries are not changed). If the 

batteries are not changed 22 days after the thermostat detects low battery voltage, the 

thermostat screen will only show the flashing battery icon until buttons are pressed. If 

the batteries are not changed 43 days after the thermostat detects low battery voltage, 

the thermostat screen will only show the flashing battery icon until buttons are pressed 

and the set points will offset to 85°F/29°C in cooling and 55°F/13°C in heating. At this 

stage, set point changes can be made temporarily but, the set points will change back 

to defaulted values after a 4-hour period. The thermostat will continue to perform this 

low battery flashing, temperature offset condition until the internal voltage threshold 

is reached. When the thermostat internal voltage threshold is reached, all relays will be 

opened and the thermostat will become inoperable until new batteries are installed.

Important:

Battery Door Information

Use the finger bevel on 

the lower portion of the 

thermostat to open the 

easy access battery door.

Replace with 

2 AA Alkaline 

Batteries. High 

quality Alkaline 

batteries are 

recommended. 

Simple operating instructions are 

found on the back of the battery door.

Set At

COOL ON

WAKE

Sun Mon Tue Wed Thu Fri Sat

EmHEAT ON

STAGE 1&2

LEAVE

RETURNSLEEP

AMPM

HOLD

Indicates the current room temperature
Time and day of the week

Setpoint:

 Displays the user selectable setpoint temperature.

Hold

 is displayed when the thermostat program is permanently overridden.

System Operation Indicators:

The COOL ON, HEAT ON will display when COOL or HEAT is on.

Note: The Compressor delay feature is active if these are flashing.

Low Battery Indicator: 

Replace batteries when this indicator is shown.

Program Time Periods: 

This thermostat has 4 programmable time periods 

per day.

Stages:

 Indicates the stages of heat that are active.

1
2

3

7
8

1

3

2

7

8

Summary of Contents for TP-P-625









Reviews: