To customize your 7 day Program schedule, follow these steps:
Programming
Programming
A Note About Auto Changeover:
When in Auto you have the ability to switch between auto heat or auto
cool by pressing the system key. This can be done once the current
mode has reached its setpoint. For example: if in auto heat, the heat
setpoint must be satisfied before the thermostat will allow you to switch
to auto cool. You can switch out of auto by holding down the system
key. To get back into auto, you must toggle the system key to auto.
10
11
Repeat steps 4 through 7 for the Saturday
WAKE/OCC1
time period,
LEAVE/UNOCC1
time period,
RETURN/OCC2
time period, and for
the Saturday
SLEEP/UNOCC2
time period.
Saturday:
Repeat steps 4 through 7 for the Sunday
WAKE/OCC1
time period,
f
LEAVE/UNOCC1
time period,
RETURN/OCC2
time period, and for
the Sunday
SLEEP/UNOCC2
time period.
Sunday:
Monday:
Repeat steps 4 through 6 for the remaining days of the week.
1.
Select
HEAT
or
COOL
with the
SYSTEM
key.
Note:
You have to program heat and cool each separately.
2.
Press the
MENU
button (If menu does not appear first, press
RUN SCHED
).
3.
Press
SET SCHED
.
Note:
Monday is displayed and the
WAKE/OCC1
icon is shown. You are now programming the
WAKE/OCC1
time period for that day.
4.
Use the or key to make your time
selection for that day’s
WAKE/OCC1
time period.
Note:
If you want the fan to run continuously during this time
period, select
ON
with the
FAN
key.
5.
Then use the or key to make your setpoint selection for
that day’s
WAKE/OCC1
period.
6.
Press
Next Step.
7.
Repeat steps 4 through 6 for
that day’s
LEAVE/UNOCC1
time period, for
that day’s
RETURN/OCC2
time period,
and for
that day’s
SLEEP/UNOCC2
time period.
